Operation Manual

Additional handsets and bases

Up to 5 handsets can be registered and operated from the base. Each handset can be

registered with up to 4 bases.

If you buy new handset to use with your base they will have to be registered to the

base before you use them.

Internal call

• If you have more than one handset registered to your base, you can:

• Make an internal calls between handsets

• Transfer an external call from one handset to another

• Hold a conference call between two internal handsets and an external call

• Make an internal call between two handsets while a third is on an external call

Make an internal call

In standby mode, long press R/INT key then enter the handset number (1-5) you

want.

Remark: If the base has only one cordless handset registered, it will immediately

start calling that handset.

Receive an internal call

Pick up the handset or press the key to answer the call.

Transfer an external call

You can transfer an external call to another handset registered to your base.

1. During an external call, long press R/INT key for 2 seconds. You caller is put on

hold.

2. Enter the number of the handset you want to transfer the call to.

If the other handset user does not answer:

You can reconnect to your external caller by long press R/INT key for 2 seconds.

Or, if the other handset user does not answer after 30 seconds you will be

automatically reconnected to your external caller. When the other handset

answers:

3. Put the handset back on base or press key on handset when the other handset

answers.