Instruction Manual

Thomson
Thomson Compact Linear Systems - Installation Manual - 2022-09 5
Safety and Standards
2. Safety
2.1 Safety notes
• Only properly qualied personnel are permitted to perform mechanical and electrical
installation of this product. Properly qualied personnel are familiar with mechanical or electrical
installation work and have the appropriate qualications for their job.
• Read this manual and any other available documentation before working on the equipment
that the actuator is or shall be a part of.
• Conform strictly to the information contained in this manual and on the product label.
Never exceed the performance limits stated herein.
• Never work on the linear system or its installation with the power on.
• Never unplug any cables or connectors during operation or with power on.
• Immediately stop using the linear system if it seems faulty or damaged in any way and notify
an appropriate person so that corrective actions can be taken.
• Grease may be present on some of the linear system screw and guide surfaces. Contact is
non-hazardous. Film should not be removed.