Operation Manual

PLUG AND PLAY 16 CHANNEL COLOUR
NETWORK VIDEO RECORDER
EN
18
d - CONFigurATiON
1 Compatiblecamerasdetectedonthe
  recorder'snetwork
2 IPaddressofthecamerayouwishtoadd
  (auto-llsifyouclickononeofthecameras
  detectedabove)
3 Nameyouwanttogivethecamerabeing
  added
4 Positionofthenameintheimage
5 Cameraconnectionport(auto-lls
  ifyouclickononeofthecamerasdetected
  above)
6 Communicationprotocol:
  •select'Propriétaire'[Owner]forcameras
  intheThomsondigitalrecorderrange
  512320to512322,512358and512359
  •selectONVIFforallothercompatible
  cameras   
  •(auto-llsifyouclickononeofthecameras
  detectedabove)
7 Camerausername(seenotebelow)
8 Camerapassword(seenotebelow)
9 Channelyouwouldliketoassigntothe
  camerabeingadded
10 Camerasalreadyaddedtotherecorder
11 Click'Recherche'[Search]toupdatethe
  listofdetectedcamerasandalreadyadded
  cameras
12 Click'Ajout'[Add]toaddthecamera
  youhaveselected
13 Ifyouselectacamerathathasalreadybeen
  addedtotherecorder,the'Effacer'[Delete]
  buttonallowsyoutoremoveit.
Important notes:
• Thecamera'susernameandthepassword
 arethoseyouusenormallyforyourspecic
 application(forexample,forThomsonIPcameras
 withreferences512390to512393:Thomview).
Rangeand
references
Defaultuser-
name
Defaultpass-
word
RangeofThom-
sonIPcameras
512390/512391
/
512392
/512393
admin Ther
eisno
default
pass-
word
Rangeof
Thomson
NVR
cameras
*
512320/512321
/
512322/
512358
/512359
admin admin
OtherONVIF
cameras
See
usermanualforcamera
being
used
*This information is recognised and input
automaticallybyyourdigitalvideorecorder'squick
congurationassistant.
• ONVIFcamerascanbeusedwithyourdigital
 videorecorderbutwecannotguaranteetotal
 compatibility(motiondetection,motorcontrolfor
 modelsequippedwithmotors,etc.)
• The'automaticmode'intheSwitchmenupairs
 thecameraspluggedintoports“LAN1“to
 “LAN16“.Topaircamerasnotconnectedto
 theseports,youmustselect'manualmode'in
 theSwitchmenu.