Operation Manual

PLUG AND PLAY 16 CHANNEL COLOUR
NETWORK VIDEO RECORDER
15
EN
d - CONFigurATiON
2.4.4 LOG TAB
This tab provides access to a search menu that
allowsyoutoviewthelogofalltheoperationscarried
out by the device: trigger events, conguration
changes, etc. The 'Sauvegarde'[Backup] button
enables you to save a copy of this log to a USB
drive.
2.5 - 'AVANCÉ' [ADVANCED] SECTION
Hereyouwillnd:
• TheMaintenancetab:allowsyoutodenean
 automaticreboottimeforthedevice,update,or
 restorethedevice'sfactorysettings.Youmay
 alsosavethecurrentcongurationinaleona
 USBdriveorreloadthem.
• TheEventstaballowsyoutoenableanddene
 howtoalertyouifthereareharddiskproblemsor
 ifthesignalfromoneofthecamerasislost(email,
 beep,etc.)
2.6 - 'ETEINDRE' [SHUTDOWN] SECTION
Youcanstoporrestartyourequipmentbyclicking
theappropriatebutton.Ausernameandpassword
mustbeentered(bydefault:User
'admin',blankpassword).
2.7 - MOTION DETECTION SETTINGS
In the quick conguration assistant, you can
programme each of the cameras to record if any
movement is detected. To set the sensitivity and
theareaforeachofthecamerastomonitor,goto
the'Paramètre'[Parameters]menu/'Entréelaire'
[Wiredinput]/'Mouvement'[Motion]: