Operation Manual

95
DHCP Commands
E-DOC-CTC-20040210-0030 v1.0
EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT:
The SpeedTouch™ is configured as DHCP client on its Ethernet interface eth0.
RELATED COMMANDS:
=>dhcp client iflist
eth0 : [BOUND]
flags= uc
IP address : 10.0.0.3
HW address : 00:90:d0:01:47:f1
DHCP server : 10.10.1.1
lease renewal in 5 days, 58 min, 45 sec
lease rebinding in 8 days, 20 h, 6 min, 18 sec
lease expires in 10 days, 2 h, 28 min, 48 sec
Number of leases: 1
Total size of table: 18, in use: 1, free: 94 %
=>dhcp client stats
DHCP client statistics:
Corrupted packet recv : 0
DECLINEs sent : 0
RELEASEs sent : 0
INFORMs sent : 0
Number of dynamic interfaces: 1
Memory usage:
Table size of dyn leases: 19, in use: 1, free: 94 %
=>dhcp client ifrelease intf=eth0
=>(CTRL + Q)
=>STATE ACTIVATE !
STATE IDLE !
STATE ACTIVATE !
dhcc: intf 1 releases 10.0.0.3 to server 10.10.1.1.
dhcc: 10.0.0.3 deleted: ok.
STATE IDLE !
STATE ACTIVATE !
.............
dhcc: intf 1 in init state.
n_send() broadcast triggered; To be verified
dhcc: broadcast discover on intf 1.
=>(CTRL + S)
=>dhcp client stats
DHCP client statistics:
Corrupted packet recv : 0
DECLINEs sent : 0
RELEASEs sent : 1
INFORMs sent : 0
Number of dynamic interfaces: 1
Memory usage:
Table size of dyn leases: 19, in use: 1, free: 94 %
=>
dhcp client ifattach Attach a DHCP lease to an interface.
dhcp client ifconfig Configure a DHCP lease created for a specific interface.
dhcp client ifdelete Delete a dynamic interface.