Operation Manual

93
DHCP Commands
E-DOC-CTC-20040210-0030 v1.0
dhcp client iflist
Show all dynamic interfaces.
SYNTAX:
EXAMPLE:
EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT:
The SpeedTouch™ is configured as DHCP client on its Ethernet interface eth0.
RELATED COMMANDS:
dhcp client iflist
=>dhcp client iflist
NewETHoA : [INIT]
flags= uc
IP address : 0.0.0.0
HW address : 00:90:d0:01:47:de
DHCP server : 255.255.255.255
Number of leases: 1
Total size of table: 19, in use: 1, free: 94 %
=>
=>dhcp client iflist
eth0 : [BOUND]
flags= uc
IP address : 10.0.0.3
HW address : 00:90:d0:01:47:f1
DHCP server : 10.10.1.1
lease renewal in 5 days, 1 h, 26 min, 45 sec
lease rebinding in 8 days, 20 h, 34 min, 15 sec
lease expires in 10 days, 2 h, 56 min, 45 sec
Number of leases: 1
Total size of table: 18, in use: 1, free: 94 %
=>dhcp client iflist
eth0 : [BOUND]
flags= uc
IP address : 10.0.0.3
HW address : 00:90:d0:01:47:f1
DHCP server : 10.10.1.1
lease renewal in 5 days, 1 h, 25 min, 27 sec
lease rebinding in 8 days, 20 h, 32 min, 57 sec
lease expires in 10 days, 2 h, 55 min, 27 sec
Number of leases: 1
Total size of table: 18, in use: 1, free: 94 %
=>
dhcp client ifadd Create a DHCP lease for a specific interface.
dhcp client ifdelete Delete a dynamic interface.