Operation Manual

58
Bridge Commands
E-DOC-CTC-20040210-0030 v1.0
bridge ifdelete
Delete a bridge interface.
SYNTAX:
where:
EXAMPLE:
Note In case of a SpeedTouch™530 device: NEVER change or delete the usb_bridge interface!
RELATED COMMANDS:
bridge ifdelete intf = <intfname>
intf The name of the interface name to be deleted.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
REQUIRED
=>bridge ifdelete intf=TestBridge
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC PortNr: 0 PortState: forwarding
RX bytes: 75783 frames: 572
TX bytes: 82843610 frames: 341554 dropframes: 0
ethport1 : Internal
Connection State: connected
Port: ethport1 PortNr: 1 PortState: forwarding
RX bytes: 156472129 frames: 5903256
TX bytes: 75689 frames: 425 dropframes: 5561702
usb_bridge : dest : usb_port
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State: connected
Port: wan2 PortNr: 4 PortState: forwarding
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
=>
bridge ifadd Create a bridged Ethernet interface.
bridge ifattach Attach a bridge interface.
bridge ifconfig Configure a bridge interface.
bridge ifdetach Detach a bridge interface.
bridge iflist Show current bridge configuration.