Operation Manual

ATM Commands

E-DOC-CTC-20040210-0030 v1.0

atm oam mode

Configure the OAM data blocking mode.

SYNTAX:

where:

atm oam mode port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>

blocking = <{disabled|enabled}>

port The port for which OAM blocking is configured.

Choose between:

• DSL0

• DSL1

• ATM2

• ATM3

• AAL5

• ATM5

Or specify a port number (dsl0 has port number 0, ..., atm5 has port

number 5).

REQUIRED

blocking Enable or disable the OAM data blocking mode on this port.

The default is enabled.

REQUIRED