Operation Manual

38
ATM Commands
E-DOC-CTC-20040210-0030 v1.0
atm oam ccconfig
Configure Operation and Maintenance (OAM) Continuity Check (CC) on the connection.
SYNTAX:
where:
RELATED COMMANDS:
atm oam ccconfig port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>]
[span = <{segment|end2end}>]
port The ATM port number.
Choose between:
• DSL0
• DSL1
• ATM2
• ATM3
• AAL5
• ATM5.
Or specify a port number (dsl0 has port number 0, ..., atm5 has port
number 5).
REQUIRED
vpi A number between 0 and 15.
Represents the Virtual Path Identifier (VPI)
REQUIRED
vci A number between 0 and 511.
Represents the Virtual Channel identifier (VCI).
For a VP cross-connection, use VCI=0 or do not specify.
OPTIONAL
transmit Enable or disable transmission of CC cells.
The default is disabled.
OPTIONAL
receive Enable or disable loss of continuity.
The default is disabled.
OPTIONAL
auto Enable or disable remote CC activation and deactivation.
The default is disabled.
OPTIONAL
span End2end or segment continuity check. OPTIONAL
atm oam cclist Show current CC configuration.
atm oam ccsend Send CC activate/deactivate to connection.