Operation Manual

394
USB Commands
E-DOC-CTC-20040210-0030 v1.0
usb add
Adds a VP or VC cross-connection between the USB interface and the WAN interface.
SYNTAX:
where:
RELATED COMMANDS:
usb add wanvpi = <number{0-15}>
wanvci = <number{0-511}>
usbvpi = <number{0-15}>
usbvci = <number{0-511}>
[qos = <{default}>]
wanvpi A number between 0 and 15.
Represents the Virtual Path Identifier (VPI) of WAN interface.
REQUIRED
wanvci A number between 0 and 511.
Represents the Virtual Channel Identifier (VCI) of WAN interface.
REQUIRED
usbvpi A number between 0 and 15.
Represents the Virtual Path Identifier (VPI) of USB interface.
REQUIRED
usbvci A number between 0 and 511.
Represents the Virtual Channel Identifier (VCI) of USB interface.
REQUIRED
qos The name of a qosbook entry. OPTIONAL
usb delete Deletes a cross-connection on the USB interface.
usb list Shows all cross-connections on the USB interface.