Operation Manual

377
System Commands
E-DOC-CTC-20040210-0030 v1.0
system setpassword
Set/change the current SpeedTouch™ system password.
Note To avoid unrestricted and unauthorized access to the SpeedTouch™, it is highly recommended to make sure
the SpeedTouch™ is protected by a system password (via the command system setpassword) and to change
the password on a regular basis
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
system setpassword [userid = <string>]
password = <password>
userid The new access userid. OPTIONAL
password The new access password. REQUIRED
=>system setpassword password=Sascha
Security notification: Password changed, use 'saveall' to make it permanent.
=>saveall
=>
system clearpassword Clear current system password.