Operation Manual

376
System Commands
E-DOC-CTC-20040210-0030 v1.0
system reset
Reset the SpeedTouch™ to its factory default settings and reboot the device. All user and Service Provider specific
settings and all saved configuration changes are lost after reboot.
SYNTAX:
where:
EXAMPLE:
system reset factory yes/no = <{yes|no}>
proceed no/yes = <{no|yes}>
factory yes/no Proceed with resetting the SpeedTouch™ device to its factory
default settings (yes) or not (no).
Note By default, the system reboot command is discarded if
no explicit positive confirmation is given.
REQUIRED
proceed no/yes Confirmation for resetting the modem. REQUIRED
=>system reset
---------------
!! WARNING !!
---------------
The modem will be reset to (factory) defaults clearing all user (and ISP) settings.
Specifying <factory=yes> deletes user and ISP specific settings.
Connectivity with the ISP network might be lost.
<factory=no> deletes user specific settings only.
factory yes/no = no
proceed no/yes = no
:system reset factory yes/no=no proceed no/yes=no
=>
=>system reset
---------------
!! WARNING !!
---------------
The modem will be reset to (factory) defaults clearing all user (and ISP) settings.
Specifying <factory=yes> deletes user and ISP specific settings.
Connectivity with the ISP network might be lost.
<factory=no> deletes user specific settings only.
factory yes/no = yes
proceed no/yes = yes
:system reset factory yes/no=yes proceed no/yes=yes
.....
(lost session connectivity due to reboot)
.....