Operation Manual

367
Switch Commands
E-DOC-CTC-20040210-0030 v1.0
switch mirror capture
Define the specified port to be the Mirror Capture Port.
Note Only one port can be the Mirror Capture Port at any one time.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
switch mirror capture port = <number{1-4}>
port The port to be the Mirror Capture Port.
If no port number is specified, then the port number of the Mirror
Capture Port is shown.
REQUIRED
=>switch mirror capture port=2
=>switch mirror capture
Mirror capture port = 2
switch mirror egress Enable or disable the specified port to be a Transmitted Port Mirroring.
switch mirror ingress Enable or disable the specified port to be a Received Port Mirroring.