Operation Manual

354
SNMP Commands
E-DOC-CTC-20040210-0030 v1.0
snmp config
Show/set global Simple Network Management Protocol (SNMP) parameters.
SYNTAX:
where:
EXAMPLE (default configuration):
snmp config [RWCommunity = <string>]
[ROCommunity = <string>]
[sysContact = <quoted string>]
[sysName = <quoted string>]
[sysLocation = <quoted string>]
RWCommunity The read-write community name.
The default is private.
OPTIONAL
ROCommunity The read-only community name.
The default is public.
OPTIONAL
sysContact The SNMP system contact.
The default is Service Provider.
OPTIONAL
sysName The SNMP system name.
The default is SpeedTouch510.
OPTIONAL
sysLocation The SNMP system location.
The default is Customer Premises.
OPTIONAL
=>snmp config
Read-write SNMP community name : private
Read-only SNMP community name : public
SNMP System Contact : Service Provider
SNMP System Name : SpeedTouch 610
SNMP System Location : Customer Premises
=>