Operation Manual

303
PPPoA Commands
E-DOC-CTC-20040210-0030 v1.0
pppoa ifdetach
Detach a PPPoA interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
pppoa ifdetach intf = <intfname>
intf The name of the PPPoA interface to be detached. REQUIRED
=>pppoa iflist
PPPoA_1: dest : PVC_1 [00:00:00]
Retry : 10 QoS default encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0 trans addr = pat mru = 1500
route : dst=0.0.0.0/0 - src=0.0.0.0/0 (metric 1)
auth = auto user = johndoe password = ********
admin state = up oper state = up link state = connected
LCP : state = starting retransm = 1 term. reason =
IPCP: state = initial retransm = 0 term. reason =
=>pppoa ifdetach intf=PPPoA_1
=>pppoa iflist
=>pppoa iflist
PPPoA_1: dest : PVC_1 [00:00:00]
Retry : 10 QoS default encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0 trans addr = pat mru = 1500
route : dst=0.0.0.0/0 - src=0.0.0.0/0 (metric 1)
auth = auto user = johndoe password = ********
admin state = up oper state = down link state = not-connected
LCP : state = starting retransm = 1 term. reason =
IPCP: state = initial retransm = 0 term. reason =
=>
pppoa ifadd Create a new PPPoA interface.
pppoa ifattach Attach a PPPoA interface.
pppoa ifconfig Configure a PPPoA interface.
pppoa ifdelete Delete a PPPoA interface.
pppoa iflist Show current PPPoA configuration.