Operation Manual

297
PPPoA Commands
E-DOC-CTC-20040210-0030 v1.0
pppoa ifattach
Attach (i.e. connect) a PPPoA interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
pppoa ifattach intf = <intfname>
intf The name of the PPPoA interface to be attached. REQUIRED
=>pppoa iflist
pppoa1: dest : pppoa1 [00:00:00]
Retry : 10 QoS default encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1500
auth = auto user = password =
admin state = down oper state = down link state = not-connected
LCP : state = initial retransm = 10 term. reason =
IPCP: state = initial retransm = 0 term. reason =
=>pppoa ifattach intf=pppoa1
=>pppoa iflist
pppoa1: dest : pppoa1 [00:00:00]
Retry : 10 QoS default encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1500
auth = auto user = password =
admin state = up oper state = up link state = connected
LCP : state = starting retransm = 1 term. reason =
IPCP: state = initial retransm = 0 term. reason =
=>
pppoa ifadd Create a new PPPoA interface.
pppoa ifconfig Configure a PPPoA interface.
pppoa ifdelete Delete a PPPoA interface.
pppoa ifdetach Detach a PPPoA interface.
pppoa iflist Show current PPPoA configuration.