Operation Manual

294
PPPoA Commands
E-DOC-CTC-20040210-0030 v1.0
pppoa flush
Flush the current PPP configuration.
Note The flush command does not impact previously saved configurations.
SYNTAX:
EXAMPLE:
pppoa flush
=>pppoa iflist
pppoa1: dest : pppoa1
Retry: 10 QoS default encaps VC-MUX
mode = IP Routing
flags = echo magic accomp mru addr route savepwd pppoaOA
trans addr = pat mru = 1500
route = 0.0.0.0/0 - 0.0.0.0/0 (metric 0)
user name = guest password = ********
admin state = down oper state = down link state = not-connected
LCP: state = initial retransm = 10 term. reason =
IPCP: state = initial retransm = 0 term. reason =
=>pppoa flush
=>pppoa iflist
=>