Operation Manual

283
NAT Commands
E-DOC-CTC-20040210-0030 v1.0
nat multinatlist
List MultiNAT configurations.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
nat multinatlist [intf = <string>]
intf The IP interface name for which the MultiNAT configuration must be
listed.
Note If no name is specified, all MultiNAT configurations are listed.
OPTIONAL
=>nat multinatlist
Indx Intf Inside-address Outside-address
64 PPPoE_1 10.0.0.1 10.10.0.138 Static MultiNAT
=>
nat multinatadd Add a MultiNAT configuration.
nat multinatdelete Delete a MultiNAT configuration.