Manualshelf

Operation Manual

ManualsBrandsThomson ManualsADSL modem510 530 Cli Refence Guide Release R4.2.7
271272273274275276277278279280
276
NAT Commands
E-DOC-CTC-20040210-0030 v1.0
nat disable
Disable NAT or PAT on the specified SpeedTouch™ IP address.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
nat disable addr = <ip-address>
addr The SpeedTouch™ IP address for which NAT/PAT must be disabled. REQUIRED
=>nat list
Indx Prot Inside-addr:Port Outside-addr:Port Foreign-addr:Port Flgs Expir State Control
1 6 10.0.0.138:80 172.16.0.5:1080 0.0.0.0:0 19 8 9
2 17 10.0.0.138:138 10.0.0.140:138 10.0.0.20:138 11 20 10
3 17 10.0.0.138:137 10.0.0.140:137 10.0.0.254:137 11 20 10
4 17 10.0.0.138:7938 10.0.0.140:7938 10.0.0.96:4756 11 20 10
5 17 10.0.0.138:513 10.0.0.140:513 10.0.0.109:513 11 20 10
6 17 10.0.0.138:111 10.0.0.140:111 10.0.0.96:4756 11 20 10
=>nat disable addr 172.16.0.5
=>nat list
Indx Prot Inside-addr:Port Outside-addr:Port Foreign-addr:Port Flgs Expir State Control
1 17 10.0.0.138:138 10.0.0.140:138 10.0.0.20:138 11 20 10
2 17 10.0.0.138:137 10.0.0.140:137 10.0.0.254:137 11 20 10
3 17 10.0.0.138:7938 10.0.0.140:7938 10.0.0.96:4756 11 20 10
4 17 10.0.0.138:513 10.0.0.140:513 10.0.0.109:513 11 20 10
5 17 10.0.0.138:111 10.0.0.140:111 10.0.0.96:4756 11 20 10
=>
nat create Create a static NAT/PAT entry.
nat delete Delete a static NAT/PAT entry.
nat enable Enable NAT/PAT on one of the SpeedTouch™ IP addresses.
nat list List NAT/PAT connection database.