Operation Manual

275
NAT Commands
E-DOC-CTC-20040210-0030 v1.0
RELATED COMMANDS:
foreign_port The port of the routable host.
Select one of the supported TCP/UDP port names (See
“ Supported TCP/UDP Port Names” on page 412 for a listing of
TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.
Applicable for TCP and UDP protocols only. Other protocols do
not need a port to be specified.
OPTIONAL
nat create Create a static NAT/PAT entry.
nat disable Disable NAT/PAT on a SpeedTouch™ IP address.
nat enable Enable NAT/PAT on one of the SpeedTouch™ IP addresses.
nat list List NAT/PAT connection database.