Operation Manual

225
IPoA Commands
E-DOC-CTC-20040210-0030 v1.0
ipoa ifdelete
Delete an IPoA interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ipoa ifdelete intf = <intfname>
intf The name of the IPoA interface. REQUIRED
=>ipoa iflist
Newipoa : dest : Br3
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : connected
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
Moreipoa dest : Br4
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : not-connected
=>ipoa ifdelete intf=Moreipoa
=>ipoa iflist
Newipoa : dest : Br3
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : connected
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
=>
ipoa ifadd Create a new IPoA interface.
ipoa ifattach Attach (i.e. connect) an IPoA interface.
ipoa ifconfig Configure an IPoA interface.
ipoa ifdetach Detach an IPoA interface.
ipoa iflist Show current IPoA interfaces.