Operation Manual

19
CLI Navigation
E-DOC-CTC-20040210-0030 v1.0
Basic Navigation and Manipulation
Manipulation commands are commands that manipulate operations on the command line, for example changing the
command group, go to the beginning of the command line, go to the end of the command line, etc.
Command group navigation
From top level, you can change to a command group by executing the name of the desired command group.
To obtain a list of all available command groups, execute help from the top level.
The example below shows every possible CLI command group for the SpeedTouch™510.
The following command groups are specific for certain variants:
• usb is only available for the SpeedTouch™530.
To return to top level, or to go up one level (in case of nested command groups), enter .. at the prompt.
Example:
=>help
Following commands are available :
help : Displays this help information
menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
Following command groups are available :
adsl atm autopvc bridge cip
config dhcp dns env eth
ethoa firewall ip ipoa ipqos
label language nat phonebook pppoa
pppoe pptp qosbook script snmp
software switch system systemlog td
upnp
=>
=>phonebook
[phonebook]=>
[phonebook]=>..
=>