Operation Manual

163
ETHoA Commands
E-DOC-CTC-20040210-0030 v1.0
ethoa iflist
Show all or a specified ETHoA interface(s).
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ethoa iflist [intf = <intfname>]
intf The name of the ETHoA interface.
Note If not specified, all ETHoA interfaces are shown.
OPTIONAL
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : connected
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
Moreethoa : dest : Br4
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : connected
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
=>
ethoa ifadd Create a new ETHoA interface.
ethoa ifattach Attach an ETHoA interface.
ethoa ifconfig Configure an ETHoA interface.
ethoa ifdelete Delete an ETHoA interface.
ethoa ifdetach Detach an ETHoA interface.