Operation Manual

157
ETHoA Commands
E-DOC-CTC-20040210-0030 v1.0
ethoa ifadd
Create a new ETHoA interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ethoa ifadd [intf = <string>]
[dest = <phonebook entry>]
intf The name for the new ETHoA interface.
If not specified, the destination will double as interface name.
OPTIONAL
dest The destination for the new ETHoA interface.
Typically, a phonebook entry.
OPTIONAL
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : connected
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
=>phonebook list
Name Type Use Address
Br1 bridge 1 8.35
Br2 bridge 1 8.36
CIPPVC3 cip 1 8.82
CIPPVC4 cip 1 8.83
=>ethoa ifadd intf=Moreethoa dest=Br4
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : connected
RX bytes: 0 frames: 0
TX bytes: 0 frames: 0 dropframes: 0
Moreethoa : dest : Br4
Retry : 10 QoS : default Encaps : llc/snap Fcs : off
Connection State : not-connected
=>
ethoa ifattach Attach an ETHoA interface.
ethoa ifconfig Configure an ETHoA interface.
ethoa ifdelete Delete an ETHoA interface.
ethoa ifdetach Detach an ETHoA interface.
ethoa iflist Show current ETHoA interfaces.