Operation Manual

112
DHCP Commands
E-DOC-CTC-20040210-0030 v1.0
DESCRIPTION:
RELATED COMMANDS:
The stat ... indicates ...
DHCP server state the state of the SpeedTouch™ DHCP server.
Corrupted packet recv the number of corrupted packets (not complaint to RFC2131) received from the
LAN.
DISCOVER the number of DHCP server discovery packets received from the Local Area
Network (LAN). These broadcasts are sent by potential DHCP clients to locate
available DHCP servers.
REQUEST the number of DHCP address lease requests received from the LAN.
DECLINE the number of DHCP address lease requests declined.
RELEASE the number of DHCP address release requests received from DHCP clients.
INFORM the number of information requests received from DHCP clients.
Pure BOOTP requests the number of BOOTP requests received from the LAN.
Other message types the number of other messages received from the LAN.
OFFERs sent the number of IP address offers sent in reply to DHCP requests.
ACKs sent the number of ACKnowledgement replies sent to successfully
configured DHCP clients.
NAKs sent the number of Not-AcKnowledgement replies sent to wrongly
configured DHCP clients.
Relay agent options dropped
Lease table got full whether the maximum number of DHCP leases is reached or not.
Ping table got full whether the history list of IP address pings got full or not. These pings are sent
by the SpeedTouch™ DHCP server to verify whether the IP address is already
in use on the LAN or not (dhcp server policy verifyfirst=yes).
Second DHCP server seen whether a concurrent DHCP server was found on the LAN or not.
dhcp server clear Clear DHCP server statistics.