Operation Manual

99
DHCP Commands
E-DOC-CTC-20040210-0030 v1.0
dhcp relay add
Add a DHCP server to the DHCP server list.
SYNTAX:
where:
RELATED COMMANDS:
dhcp relay add addr = <ip-address>
[intf = <none|interface_name>]
[giaddr = <ip-address>]
addr The DHCP server IP address. REQUIRED
intf The name of the relay interface.
Use None to indicate that no interface is specified.
OPTIONAL
giaddr The giaddr field to be used in relayed DHCP packets. OPTIONAL
dhcp relay config Set the relay configuration settings.
dhcp relay delete Delete a DHCP server from the DHCP server list.