Operation Manual
EN
7
Use more of your TV
Otherwise no sound will be output.
- Select Off to turn off the audio output from the audio
device connected to the SPDIF output.
Note: The options you may choose depend on the
programme you are watching. If you select
PCM and the sound is ahead of the picture,
you can select SPDIF Delay from the Options
menu and press ŻŹ to adjust the delay time
to synchronize the sound with the picture.
7/LQN
To search for CEC devices connected to the HDMI
sockets in your TV and enable one-touch play and
one-touch standby between CEC devices.
(QDEOHRUGLVDEOH7/LQN
Press Menu on the remote control, then select
2SWLRQV!7/LQN.
Press ŻŹ to select On or Off.
Use one-touch play
One-touch play enables you to press the play button
on, for example, your DVD remote control. This starts
playback on your DVD device and automatically
switches your TV to the correct source, displaying DVD
content.
Use system standby
System standby enables you to press the
button on,
for example, your TV remote control. This switches
your TV and all connected HDMI devices to standby
mode.
1HWZRUNXSGDWH
Press Menu on the remote control, then select
2SWLRQV!1HWZRUNXSGDWH. Select On/off to enable
or disable the Network update function.
- When this function is on, the TV will automatically
update channels if your DTV service provider
updates his DTV network.
- When this function is off, you need to run channel
searching again to get new channels or remove
unavailable channels if your DTV service provider
adds or removes channels from their DTV network.
Common interface
Scrambled digital TV channels can be decoded with
a common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
VHUYLFHV\RXFKRRVHIRUH[DPSOHSD\79&RQWDFW
your digital TV service operator for more information
about services and terms.
Use the common interface module
:$51,1*6ZLWFKRII\RXU79EHIRUHLQVHUWLQJD
FRPPRQLQWHUIDFHPRGXOH%HVXUHWRIROORZWKH
LQVWUXFWLRQGHVFULEHGEHORZ:URQJLQVHUWLRQRID
common interface module may damage both the
PRGXOHDQG\RXU79
Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
Push the module in as far as it will go.
Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
N
ote: Do not remove the common interface module
from the slot. Removing the module will
deactivate the digital services.
$FFHVVFRPPRQLQWHUIDFHVHUYLFHV
After inserting and activating the common interface
module, press Menu on the remote control and select
Options > Common interface.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.
6RIWZDUHXSGDWH
Press Menu on the remote control and select
2SWLRQV!6RIWZDUHXSGDWH. Press OKŹ to enter.
- &XUUHQWYHUVLRQ: Checks the current version of the
software.
- Product name: Displays the product name of your
set.
- Serial numberLIDYDLODEOH'LVSOD\VWKHVHULDO
number of your set.
- OADRYHUDLUGRZQORDG(QDEOHV\RXWRLQVWDOOWKH
latest version of the software if available. Select
OAD and press OKŹ to enter.
8VHŻŹWRVHlect Yes under $XWRGRZQORDG
to automatically download the latest software if
available. After the software has been downloaded
successfully, you will be prompted to decide if you
want to install it right now. If yes, follow the hints
on the screen to complete your installation. You
can also select to ignore the installation here.
Select No under $XWRGRZQORDG to decline the
automatic download.
Select 0DQXDO2$'GRZQORDGand press OKŹ
to start manual scanning the latest software.
Follow the hints on the screen to complete. During
the scan, press OK/Exit to cancel or exit the
process.
Change to Shop or Home mode
Press Menu on the remote control and select
2SWLRQV!/RFDWLRQ.