Operation Manual
EN 11
WKHV\VWHPLVUHDGLQJD¿OHRUWUDQVPLWWLQJGDWD
otherwise the system or the device may be
damaged.
Schedule list
This function is used to perform scheduled recording.
Press Option on the remote control and select
Quick access > Schedule list.
Press OK/Ź to display the schedule list.
To add a schedule into your schedule list, press
WKHUHGEXWWRQ¿UVWWRGLVSOD\Schedule list. Then,
- Channel number: use ŻŹ to select the
channel number.
- Start date: use the digit buttons to set the
recording date.
- Start time: set the starting time of recording.
- Stop time: set the stopping time of recording.
- Schedule type:
set Reminder to be reminded that you can
switch to the scheduled programme when the
time you set comes. When time is out and you
don’t execute any operation, the dialog box
will disappear and no further operation will be
executed.
Vet Record to check if you really want to start
your scheduled recording when the time you set
comes. When time is out and you don’t execute
any operation, scheduled recording will start
automatically.
- Repeat type: set different repeat modes of
recording.
Press
ŸźŻ/ Ź to select Add, then press OK to
add the schedule you set into your schedule list.
Press the red button to repeat above procedures
to add another schedule.
If you wish to edit or delete a schedule, select it
and press OK to enter.
Press Exit to close the menu.
1HWZRUNFRQQHFWLRQ
You can set up your TV so that it can access the
,QWHUQHWWKURXJK\RXUORFDODUHDQHWZRUN/$1XVLQJ
a wired or wireless connection.
&RQQHFWLQJWRDZLUHGQHWZRUN
You can attach your TV to your LAN using cable in
three ways:
You can attach your TV to your LAN by connecting
the LAN port on your TV to an external modem
using a Cat 5 cable.
You can attach your TV to your LAN by connecting
the LAN port on your TV to a IP Sharer which is
connected to an external modem. Use Cat 5 cable
for the connection.
'HSHQGLQJRQKRZ\RXUQHWZRUNLVFRQ¿JXUHG
you may be able to attach your TV to your LAN by
connecting the LAN port on your TV directly to a
network wall outlet using a Cat 5 cable. Note that
the wall outlet is attached to a modem or router
elsewhere in your house
.
Select 2SWLRQV!1HWZRUN> &RQ¿JXUDWLRQ >
Interface, then select Ethernet to connect to a wired
network.
&RQQHFWLQJWRDZLUHOHVVQHWZRUN
To connect your TV to your network wirelessly, you
need a wireless router or modem and a Wireless
LAN Adapter. Connect your Wireless High Gain USB
$GDSWHU86%GRQJOHGHOLYHUHGZLWK\RXU79WR\RXU
TV’s USB 1 port.
Select 2SWLRQV!1HWZRUN> &RQ¿JXUDWLRQ >
Interface, then select Wireless to connect to a
wireless network.
Select Wireless setting and press OK/ŹWRHQWHU.
Connection Methods: You can setup the wireless
network connection three ways.
- Scan
Select Wireless setting > Scan, then press
OK/ŹWKH79ZLOOVFDQDOODFFHVVSRLQWVZLWKLQ
range. The access points found by the TV will
be displayed.
Select an available access point, then press
OK/ŹWRFRQQHFWWKH79WRLW
Notes:
-
If you select a protected access point, you will
have to enter the corresponding password.
Press Menu on the remote control to display
virtual keyboard to enable you to enter the
password.
- This set has a memory function of available
access point, which enables your set to be
connected to the network even if you switch on
TV after power off.
- Manual
Select Wireless setting > Manual, then press
OK/Ź\RXZLOOEHSURPSWHGWRHQWHUWKHFRUUHFW
SSID of an available wireless router to setup the
connection.
- Auto
If your AP supports WPS (Wi-Fi Protected
6HWXS\RXFDQFRQQHFWWRWKHQHWZRUNYLD3,1
3HUVRQDO,GHQWL¿FDWLRQ1XPEHURU3%&3XVK
%XWWRQ&RQ¿JXUDWLRQ:36ZLOODXWRPDWLFDOO\
FRQ¿JXUHWKH66,'DQG:3$NH\LQHLWKHUPRGH
Select Wireless setting > Auto, then press
OK/ŹWRHQWHU
PIN: Select PIN and press OK/ŹWRHQWHU
Generate a random PIN code. Make sure this
code is installed to the AP. (For the procedures,
UHIHUWR\RXUURXWHUPDQXDO3ress OK/ŹDJDLQ
to setup the connection.
PBC: If your router has a PBC push button,
Use more of your TV