Specifications
EN 9
Diagnostics on digital TV channels
1. Press Menu on the remote control and select
Setup > Diagnostics.
2. Press OK/► to display some signal information
on current digital channel, such as signal strength,
frequency, etc..
Time shift
Allows you to record the TV programme so that you
won’t miss the favourite part even if you go out. Before
you use the function, connect a USB device to the TV
rst. For the rst time, you should do the disk setup for
the USB device.
1. Press Menu on the remote control and select
Setup > Time shift.
2. Press ◄/► to select On to switch on the time shift
function, then press Exit to close the menu.
3. Press Option on the remote control and select
Time shift, then press OK to conrm.
4. Follow the directions on the screen to do the
setup.
5. After the disk setup is done, press Option and
select Time shift.
6. Press OK to display the time shift menu.
- Press the red button to pause the picture and
begin the time shift.
- Press the red button to play the recorded part.
- When the time shift menu disappears and only the
timing of the time shift remains on the screen, you
can press the red button or OK to call out the time
shift menu.
- Press the green button to fast backward or the
yellow button to fast forward.
- Press the blue button to quit the time shift
function.
Notes:
- Before you plug the USB device to TV, make
sure you have backed up the data in the device
to avoid the unusual performance make your
important data lost.
- We recommend you use a USB device with the
free le size bigger than 1Gb and disk speed
faster than 5.0M/sec.
- The bigger le size for time shift, the longer you
can record the programme.
- If changing channel in time shifting, a message
prompts to let you select Yes or No. You can
select Yes to exit the time shift function and
execute the channel change.
Reset shop
Allows you to reset the TV to factory default settings.
1. Press Menu on the remote control and select
Setup, then press OK to conrm.
2. Select Reset shop and press OK/► to enter.
3. Use the digit buttons to enter the password to
enter.
4. Press ◄/► to select OK and press OK to conrm.
5. The Initial setup menu appears. Follow the
related instructions.
Customising the input settings
You can congure your TV according to the
equipment you connect to it.
1. Press Menu on the remote control and select
Setup > Input settings.
2. Press OK/► to enter Input settings.
3. Press ▲/▼ to select a connector your equipment
is connected to.
4. Press ◄/► to select the type of apparatus
attached to this connector.
5. Press Menu to return to the Setup menu.
After conguring, the selected source label will be
displayed after the name of the related connector in
the source list when pressing Source on the remote
control or OK on the TV set.
Note: Not all models have OK button on the set.
Use Electronic programme guide
EPG is an on-screen guide that displays scheduled
TV programmes. You can navigate, select and view
programmes.
1. Press Guide on the remote control, the Now and
Next EPG menu will appear, which allows you
to get the knowledge about the current or next
programme playing on each channel. Navigate
through the different programmes using navigation
buttons on the remote control.
2. Use the colour buttons to view 8 Days EPG.
- Prev day(Red): List the previous day’s EPG.
- Next day(Green): List the next day’s EPG.
- View detail(Yellow): Display the description
about this programme if available.
- Type lter(Blue): Programme guide lter for
digital TV programmes.
• Press the blue button to display the
programmes’s type and subtype list.
• Navigate through the different types and
subtypes using navigation buttons on the
remote control.
• Select one or more types which you want to
highlight from the Type list, press OK to select (or
unselect). A checkmark will appear to the left of
the type when selected. When you select a type,
all its subtypes will be selected accordingly.
• Also, user can select some desired subtypes
without selecting any type rst.
• Press the blue button to exit the type and
Use more of your TV