User's Manual

Table Of Contents

Allow the phone to charge for

12 hours before using the first

time. If you don't charge the

phone properly (for 12 hours)

when you first set up the

phone, perfomance of the

battery will be compromised.

5. After charging, remove and

reattach the mounting bracket by

inserting the two tabs at the top

and then snapping the tab at the

bottom into place.

6. Plug the telephone line cord into

the phone jack on the back of the

unit and then into the wall phone

jack.

7. Slip the mounting holes over the

wall plate posts and slide the unit

down firmly into place. (Wall

plate not included.)

8. Press the PWR button on the

handset.

is displayed.

When

Ready

is displayed the

phone is ready for use.

NOTE : The phone automatically defaults to touch-tone dialing. To change to

pulse (rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type

of service you have, check with the phone company.

CAUTION: Use only the Thomson 5-2470 power supply that came with this unit.

Using other power supplies may damage the unit.