MARS TECH LIMITED EXHIBIT A {FCC Ref. "Installation and Operating Instructions Furnished to the User" EXHIBIT A FCC ID: GOTH-9774 Mars tech Report No.
FRY 25-Channel Cordless Speakerphone with Type ll Caller ID and Dual LCD Display User's Guide We bring good things to life. FCC ID: GOTH-9774 EXHIBIT Mariachi Report No.
FCC REGISTRATION INFORMATION ‘Suety GE min phone equipment is regiment with tha Federal Communications Commission and is (0 compliance with parts 15 and 88. FLC Rules and Regulations. Notification to the Local Telephone Company Gn the bot am of Ts equipment is a fable indicating, amen other information, the FCC Irateness amber and Ringer Equivalence Number (REN) for the equipment.
‘TABLE OF CONTENTS FCC REGISTRATION INFORMATION INTERFERENCE INFORMATION Hearing Ain Compatibility INTRODUCTION CALLER ID CALL WAITING CALLER ID WITH CALL SWATTING DIGITAL SECURITY SYSTEM . INSTALLATION AND SETUP... MODULAR JACK REQUIREMENTS DESKTOP INSTALLATION Wall Mon INSTALLATION Telephone Setup Volume .. RINGER SWITCH Erring THe Area Cove For Clare [is] TELEPHONE OPERATION .. To Mace a Cau ar THE Base Unit To Receive a Cau AT THE Base Uni To Make a Caw.
INTRODUCTION Your GE cordless phone is designed to give you flexibility in use and high quality performance. You can use this phone with basic telephone service, but it fully functions when equipped with the following features: CALLER ID This feature allows you 10 see the number or name and number of the person calling before you answer the phone. CALL WAITING This feature allows you to answer incoming calls while you are talking on the phone.
INSTALLATION AND SETUP Make sure your package includes the items shown here. Short telephone line card AC power supply Ae Handset wall mount bracket. Telephone line cord NOTE: Use only the Thomson power supply #52429 that came with this unit. Using other adapters may damage the unit. MODULAR JACK REQUIREMENTS You need an RJ11 type modular jack, which is the most common type of phone jack and might took like the one pictured here.
DESKTOP INSTALLATION DO T/P switch 1. Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE for pulse (rotary) service. If you don‘t know which type of service you have, check with the phone company. . Set the RINGER switch to ON so the handset rings for incoming calls. . Plug the power supply cord into the base and into an AC outlet. . Raise the base antenna. . Place handset in the base. Allow the phone to charge for 12 hours before using the first time.
Ware MOUNT INSTALLATION Because iris necessary to cradle the handset for 12 hours prior to connecting it for use the first time, it is better to leave the unit on a flat surface during initial charge before attempting to hang it on the wall. 1. Connect the power supply adapter to the DC ADAPTER jack on the back of the unit. 2. Place the handset in the base. Allow phone to charge for 12 hours before using the first time. The CHARGE/IN USE light comes on.
TELEPHONE SETUP After charging the handset for an initial 12 hours: 1. Set the PULSE/TONE switch to TONE for touch-tone service or PULSE for rotary service. If you don't know which type of service you have, check with the phone company. 2. Turn on the RINGER switch so the handset rings for incoming calls. (ID PULSE/TONE switch RINGER SWITCH The handset ringer switch can be set to ON or OFF. Also, the base has a 3-position switch (OFF, LO, and Hi} that controls the unit's ringing ability.
SETTING THE AREA CODE FOR CALLER ID Setting your area code is necessary tor proper caller ID operation. Once you set the code, the phone will automatically remove it from local calls within your area before it stores the number in memory, This will enable you to use the redial feature more efficiently because you will not have to remove the code each time you call that number. You must set the area code on both the handset and the base. To set your area code: 1. Make sure the handset or speakerphone is OFF.
TELEPHONE OPERATION To MAKE A CALL AT THE Base Unruly 1. Press SPEAKER. 2. Wait for dial tone. 3. Dial phone number. 4, When finished, press SPEAKER to hang up. To RECEIVE A CALL AT THE Base Runt 1. Press SPEAKER. 2. When finished, press SPEAKER to hang up. To Mace a Carr FROM THE HANDSET After initial set up, put handset in the base for 12 hours to charge the battery. To make a call, press the PHONE button before you dial. To hang up, press PHONE again or put the handset back on the base.
2. Press the PHONE bunion to answer the call. Distinctive RING The base unit and the cordless handset are capable of receiving the distinctive ringing patterns generated through your local telephone company as a special service. This custom calling service is available only through your focal telephone company. AUTO STANDBY While the handset is “on”, place it in the base and it will automatically hang up. Automatic Repeal The handset and base each have one separate redial number.
To Repeal THE Last NUMBER CALLED AT THE Bast 1. Press SPEAKER, 2. Wait for dial tone. 3. Press REDIAL. Fast REDIAL if you want to keep dialing a busy number in rapid succession, you can do so with Fast Redial. When you hear the busy signal, just press the REDIAL button. The phone will go off-line, on-line and then redial the busy number. Press REDIAL to try again. Mute To prevent the person you are speaking to from hearing you, press the MUTE button.
TEMPORARY TONE This feature enables pulse (rotary service phone users to access touch-tone services offered by banks, credit card companies, etc., by pressing the TONE button to temporarily make the phone touchstone compatible. To get information about your bank account, for example, you would: 1. Cal! the bank's information line. 2. Press the TONE button after your call is answered. 3. Follow the voice instructions to complete your transaction. 4. Hang up when finished.
TO ACTIVATE INTERCOM AT THE BASE Press the INT button to activate and deactivate this feature, TO ACTIVATE INTERCOM AT THE HANDSET 1. Press INTERCOM button on handset. 2. Speak into handset mic. 3. When finished, press INTERCOM to turn off. TO ANSWER A CALL WHILE IN INTERCOM Press the PHONE button on handset. This ends the intercom conversation and answers the incoming call. NOTE: Handset must be within range of the base unit in order for Intercom to function.
Fr Ash tse the FLASH button to activate custom ailing services, such as call waiting or call transfer. These services are available through your local phone company. The FLASH button is also used to enter a pause in the dialing sequence. TIP: Do not use the PHONE or SPEAKER buttons to activate custom calling services, such as call waiting, or you will hang up the phone. Also, do not use the FLASH button to hang up the phone.
PAGE Press the PAGE button on the base to momentarily locate a misplaced handset. When you press the PAGE button, the handset beeps and gives a series of tones for a short period. PAGING YOU also shows on the handset display. To activate FIND, press and hold the PAGE button. You will hear a continuous series of tones until you find the handset.Press the TALK button when you locate it.
« Stay reasonably close to the phone so that you can be clearly heard by the person to whom you are speaking. » The speakerphone indicator light is on when the speakerphone is in use. ANSWERING AND PLACING CALLS The phone will automatically answer if you just pick up the handset or press the SPEAKER button, Receiving a Calf 1. Pick up handset and press PHONE or press SPEAKER on base to answer an incoming call. 2.
Caller ID OPERATION VERY IMPORTANT: The Caller ID feature of this product requires a subscription to Caller ID service from our telephone company. Time Date Call sequence number 10:5177 8/1 pep #25 2345518301 JOHN SOUTH Caller ID phone number Caller ID name This caller ID cordless telephone receives and displays information transmitted by your local phone company. This information can include the phone number, date and time; or the name, phone number, date and time.
REVIEWING MESSAGES As calls are received and stored, the display is updated to let you know how many calls have been received. * Press the arrow up A bunion to begin with the oldest call and scroll toward more recent calls higher numbers). * Press the arrow down Ww button to begin with the most recent call and scroll toward older calls {lower numbers). As you review calls, the display shows you the following information: 0.51% 2345618901 « ..the telephone number of the caller aH SAITH + _.
Dialing a Carter ID N Umber * Make sure the phone is OFF. « Use the arrow buttons to display the desired caller ID record. = Press the CALL BACK button if the number is local. * Press the # key {DIAL 14 to dial along distance number or a number that requires you to dial *1" for proper connection. DELETING CALLER ID RECORDS To delete only the record in the display: 1. Press review CID records. 2. Select the record to delete. 3. Press DELETE. The display asks you to confirm the deletion.
Special FEATURES CALL Warring wit H Carper ID Provided your telephone company is able to integrate Caller 1D and Call Waiting services, you C122 4/3 uy 13 will see who is calling you when you hear the call i 108 816 5432 waiting beep. The caller identification information JANE DOE appears in the display after you hear the tone. + Press the FLASH button 10 put the person to FLASH whom you're talking on hold and answer the incoming call.
+ If you are using two letters consecutively that are stored in the same number key, you must press ENTER between the jesters. For example, if you enter Barb, press 2 two times for B; press ENTER; press 2 for A; 7 three times for R; and 2 two times for B. You need to press enter heathen the B and the A since they are stored within the same number key. NOTE: To enter characters other than letters, press and scroll through the choice available on numbers 1,2,3,4,5,6 and 8. 4. Press MEMORY.
INSERTING A PAUSE IN THE Dialing SEQUENCE Press the FLASH button to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone for example, after you dial 9 for an outside line or to wait for a computer access tone. Each pause counts as digit in the dialing sequence. FLASH VERY IMPORTANT; If you make test calls to emergency numbers stored in memory, remain on the line and briefly explain the reason for the call to the dispatcher.
CHAIN DIALING FROM MEMORY Use this feature to make calls that require a sequence of numbers, such as 2 calling card number used for a frequently called long distance number.
REVIEWING AND DELETING STORED NUMBERS ~~ MEMORY 1. Press MEMORY While the entry is displayed, press the DELETE key to delete the entry. DELETE The display asks you to confirm that you ¥ want to delete the entry. 3. Press DELETE a second time to delete the entry. ERASE NEG? To exit the memory review mode, press MEMORY. DELETE VERY IMPORTANT PERSON (VIP) FEATURE ‘You can designate 5 Caller ID records as VIP, Each time someone an the VIP list calls, you will hear a distinct ring.
3. When you see the desired lumbermen in the display, press CALL BACK for local calls. 1f the VIP number is Jon distance, just press # {DIAL 14. # automatically enters the "1" needed to complete a long distance call. Re Moving A VIP NUMBER 1. Press VIP. 2, Use the arrow bunions to scroll through the VIP list. 3. When you see the desired name/number in the display, press DELETE. Note: If name information is notion the caller ID record, the name will nat be stored in the memory location. 4.
MESSAGE INDICATORS The following indicators show the status of a message or the unit. CALLER ID ERROR ENTER AREA CODE ENTER NAME ERASE ALL? ERASE ALL VIP ERASE CALL ID? ERASE MEMO? NEW OUT OF AREA PAGING YOU PRIVATE PERT NOG CALLER ID Caller information has been interrupted during transmission or the phone is excessively noisy. Prompt telling you to enter your area code. Prompt telling you to enter name into VIP memory or one of the 10 memory locations.
Batter Y SAFETY PRECAUTIONS + Do not disassemble, mutilate, puncture, wet, or dispose of battery in fire. Like other batteries of this type, if iris burned or punctured, it could release toxic materials which can cause injury. + Keep batteries out of the reach of children. NOTE: The CURB seal on the battery used in your %. Thomson Consumer Electronics product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States of America.
Troubles Hooting TIPS Carter ID PROBLEM No Display Data Error Message CALL WAITING PROBLEM You hear call waiting tone but number does not appear in display. SOLUTION * Try replacing the battery, «if you are using AC power, make sure that the unit is connected to a non-switched electrical outlet. Disconnect the unit from the plug and plug tin again, « The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring.
TELEPHONE PROBLEM No dial tone Dial tone is OK, but cant dial out Handset does not ring 30 SOLUTION + Check installation: — Is the base power cord connected to a working outlet? — Is the PHONE or SPEAKER light on? — Is the telephone line cord connected to the base unit and the wall jack? + Disconnect the base from the wall jack and connect another phone to the same jack. if there is no dial tone in the second phone, the problem might be your wiring or local service.
# button does not work You experience static, noise, or fading in and out Unit beeps Memory Dialing * You may have too many extension phones on your line. Try unplugging some phones. * See solutions for “No dial tone.” » Make sure phone is set to TONE. = Change channels » ls handset out of range? Move closer to the base. » Does the base need to be relocated? «Charge battery.
Battery 32 i you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack: ¢ Short talk ime *Poor sound quality * Limited range *CHARGE AN USE light fails to light
Causes oF Poor RECEPTION * Aluminum siding on the building + Foil backing on building insulation + Heating ducts and other metal construction can shield radio signals * You're too close to appliances such as microwaves, stoves, computers, etc.
REPLACING THE BATTERY The handset comes with a brand new, consumer-replaceable nickel cadmium (Ni Cad) battery pack. With normal use and recharging, a Ni Cad battery pack should last a full year. Use GE TB-12 replacement battery, TO REPLACE THE BATTERY: 1. Make sure phone is OFF before you replace battery. Artery Holding Swap Plug 2. Slide open 3. Remove battery 4. Pull out the 5. Remove the the battery strap. battery plug. battery pack. compartment door. CHARGE/IN USE indicator 6. Replace and 7.
INDEX A Accessory Order Form 36 Auto Standby 11 B Battery replacement 34 Battery Safety Precautions 28 Cc Alter 1D Call Waiting 4, 21 Deleting ail records 20 Deleting records 20 Dialing 20 Message Errors 19 Operation 18 Receiving snd storing calls 18 Reviewing messages 18 Chain Dialing from memory 24 Changing a stored number 23 Kennel 12 D Desktop Installation 6 Dialing a stored number 23 Distinctive Ring 11 £ FCC Registration information 2 Flash 15 G General Product Care 28 H Hearing Aid Compatibility 2 1
v Very IMPORTANT PERSON {VIP} Feature 25 Gatling a VIP number 25 Removing a VIP number 26 Storing a VIP number 25 Volume 8 w Wall Mount Installation 7 Warranty 38 37
Ligated WARRANTY What your warranty covers: + Any defect in materials or workmanship. For how long after your purchase: + One year. {The warranty period for rental units begins with the first rental or 45 days farm date of shipment to the rental firm, whichever comes first.) What we will do: + Provide yau with a new or, at our option, a refurbished unit. « The exchange unit is under warranty for the remainder of the original product's warranty period. How to make a warranty claim: + Properly pack your unit.
