User's Manual

Three-Way Calling

1. During an external call, press the delete/intercom/conf button. LINE ON HOLD

EXTENSION? shows in the display.

2. Use the touch-tone pad to select Handset #. You will hear a paging tone and

PAGING shows in the originating handset’s display.

NOTE: PAGING FROM... shows in the display on the receiving

handset, and the receiving handset presses the

delete/intercom/conf

or TALK button to answer the intercom.

3. When the receiving handset connects, press the delete/intercom/conf button

on the originating handset to conference with the receiving handset and

the external caller. CONFERENCE shows in the display on the originating and

receiving handsets.

NOTE: A handset can enter conference mode directly by pressing

TALK or SPEAKER on the second handset during a call.

Transferring External Calls to Other Handsets

During an external call, you may transfer the external call to another handset.

1. Press the delete/intercom/conf button on the originating handset to put an

external call on hold, and then page the receiving handset.

2. Use the touch-tone pad on the handset to select Handset #. You will hear a

paging tone. PAGING shows on the originating handset’s display, and PAGING

FROM... shows on the receiving handset’s display.

3. When the receiving handset connects, press the TALK or SPEAKER button on the

originating handset to transfer the call.

-OR-

4. Press the TALK or SPEAKER button on the originating handset to transfer the

call. If the receiving handset does not answer within 30 seconds, the originating

handset rings back and displays CALLBACK. If the originating handset does not

answer within 30 seconds, the call is automatically dropped.