User's Manual

Appendix - Customizing Your Handset

5. Using Your Phone With Multiple Handsets

a. Registering/Re-Registering an Extra Handset

You can have up to 5 handsets registered to your Advanced Cable

Gateway system base. Refer to Thomson URL to see how addtional

Handsets may be purchased.

If you already have 5 handsets registered and you want to swap one

of them, you must remove that handset from your list of registered

phones (uninstall it) before installing the replacement handset.

On the base:

Switch the base to registration mode.•

On the handset:

Select“Menu”bypressingthesoftkey.•

Selectthesettingsiconandconrm• .

Select“Registration”andconrm.•

Select“RegisterHandset”andconrm.•

Select the base to be associated with this handset • (1 to 4)andconrm.

Enter the system PIN • (0000 by default)andconrm.

Wait3to4minutesfortheconrmationscreen.•

YourHandsetisnowregistered.•

b. Selecting a Base

Each Handset may be registered to 4 different Gateway bases.

If you register your handset with a non-Thomson Advanced Cable

Gateway base, you will not be able to access the data functions.

To change base:

Select“Menu”bypressingthesoftkey.•

Selectthesettingsiconandconrm• .

Select“Registration”andconrm.•

Select“SelectBase”andconrm.•

Selectthenumberofthebaseusingtheupanddown• (navigation) keys

(1 to 4) andconrm.

Thebasestowhichthehandsetisregisteredareidentiedbythe[]•

symbol.