User's Manual
4
Safety
Meaning of Symbols
This symbol is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product housing that may be of sufcient
magnitude to constitute a risk of shock.
This symbol is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions accompanying the product.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
Base Station:
This device should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body. This transmitter and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
Portable Part (Phone):
For hand held operation, this phone has been tested and meets the FCC RF exposure guidelines.
North American Cable Installer
This reminder is provided to call your attention to Article 820-40 of the National Electrical
Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper
grounding and, in particular, species that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Model Type ACG905 -- C
Operating Voltage 120V AC / 60 Hz / 0.5A
Typical Power Consumption 25W max
Weight 0.872 Ib / 0,395 kg
Dimensions (W x H x D) 7.79 x 7.68 x 3.94 Inch
Operating Temperature Range 59 to 95° F / 15 to 35°C
Storage Temperature Range - 4 to 158°F / - 20 to 70°C
Remote Control Battery Type Li-Ion 11.1V 2,150 mAh
Technical Specications
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following 2 conditions: 1. This device may not cause harmful interference; 2. This
device must accept any interference received, including interference that may
cause undesired operation. Responsible party (contact for FCC matter only):
THOMSON Inc.
101 W. 103rd St.
Indianapolis, IN 46290 U.S.A.