User's Manual
32
Activating Services
Wi-Fi Connection
The Advanced Cable Gateway is ready to support Wi-Fi and comes with a
card. Follow these instructions for installation:
FRONT of WiFi card
(this side must face you
during insertion)
BACK
of WiFi card
Ensure the power cord is unplugged.
Remove the protective cover over the
WiFi slot located on the upper right
hand side of the gateway.
Make certain that the front of the
WiFi card is facing you.
Insert the WiFi card in the slot as far
as it will go without forcing it.
Plug the power cord into the wall
socket.
Cover for WiFi slot removed
WARNING: The Gateway must be
unplugged from the wall
socket before you attempt
to install the WiFi card.
Light Indicators on the Front Panel
After the card is inserted and the ACG
Gateway is plugged back into the power
outlet, you will know that the connection is
successful when the PWR LED on the front of
the Gateway shows a green light.
Also
WhenyourstturntheGatewaybackon,the
LINK LED will blink a green light - fast;
when the card connects to the network
sucessfully, it will blink - slowly.
Slot for WiFi
with
cover removed