User's Manual

Parts and Putting them Together

Assemble

Connecting the Advanced Cable Gateway to a

Figure 1

For optimum performance, be sure to connect your Advanced Cable

Gateway to the rst point the cable enters your home.

The splitter must be rated for at least 1GHz.

Grounding Wire

Grounding Rod

New Cable Wire

ACG

Modem

converter

Splitters -

New 2-way splitter:

One leg goes directly to the ACG (modem)

One leg goes directly to the IN on the next splitter

Cable Drop

Single Computer

This section of the manual explains how to connect your Advanced Cable

Gateway to the ethernet port on your computer and install the necessary

software.

Please refer to Figure 1 (below) to help you connect your ACG Modem

for the best possible connection.

1. Attaching the Cable TV Wire to the Advanced Cable Gateway

LocatetheCableTVwire.Youmaynditbylocatingequipmentthatis

connected directly to the Cable TV wire such as:

a TV a Cable TV converter box or a VCR.

The Cable TV line will be connected to the socket which should be

labeled:

IN CABLE IN CATV CATV IN, etc.

The line will be coming out from under a baseboard, heater, or other location.

Refer to Figure 1 (below) for the wiring example.