User's Manual

Parts and Putting them Together

Assemble

Handset

Installing the Handset Batteries

Slide the battery door off the back of the Handset.•

Insert the batteries • (included) into the housing in the Handset being

careful to align the + / - ends correctly (refer to the graphics in the

housing).

Check that the screen lights up, then replace the cover.•

Wait for about 1 minute to allow the system to start up.•

When your handset is registered to its base, •

the screen displays the number “1” alongside the

(green - has

signal) symbol.

Note: Only use rechargeable batteries with exactlythesamespecications

as those supplied with the product.

Note: The use of a non-rechargeable or incompatible batteries may

damage the product and may be hazardous to health (please refer to

“TechnicalSpecications”onpage??).

CAUTION

Caution - special care should

always be taken with the

loudspeaker - never allow

anything to poke through or

pour into the holes. It is very

delicate.