User's Manual

34
Other Information
Battery Safety Precautions
Do not burn, disassemble, mutilate, or puncture. Batteries of this type could release
toxic materials which can cause injury.
To reduce the risk of fire or personal injury, use only the Nickel-metal Hydride
battery listed in the User’s Guide.
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
Troubleshooting Guide
Telephone Solutions
No dial tone
Check and repeat installation steps:
Ensure the base power cord is connected to a working electrical outlet .
Ensure the telephone line cord is connected to the base and the wall jack.
Connect another phone to the same jack; if there is still no dial tone, the problem
might be your wiring or local service.
The handset may be out of range of the base. Move closer to the base.
Ensure the batteries are installed correctly.
Cannot dial
Keypad may be locked. If the Padlock icon is on, press unlock in order to deactivate
and enable the keypad.
No signal icon
The handset may be out of range of the base. Move closer to the base.
Register handset.
Handset does not ring
Make sure the handset ringer switch is turned ON, this can be done through the
handset setup menu - Ringer Volume.
The handset may be out of range. Move closer to the base.
You may have too many extension phones on your line. Try unplugging some
phones.
Check for dial tone.