User's Manual Part 4

ManualsBrandsThomson ManualsElectronicsCordless Telephone Base

Advanced

Internet Settings

You can conﬁgure settings such as IP mode, IP address, Skype

proxy and Firmware proxy. However, if you have an advanced

Internet connection and are not familiar with ﬁrewalls and ports,

we recommend that you consult someone with knowledge on this

or read more on the topic at www.skype.com.

In IP mode you can choose Dynamic or Static. The default setting

of your GE/Skype phone is dynamic IP mode which covers theGE/Skype phone is dynamic IP mode which covers the is dynamic IP mode which covers the

needs of most users.

Should you wish to attach the base station to an Internet

connection using the static IP mode instead, this is how to

conﬁgure this mode:

1. From the Idle screen, press to enter the main menu.

2. Press and to select Settings.

3. Press and to select Advanced.

4. Press and to select Internet settings.

5. Press to select IP mode.

6. Press and to select Static.

7. A wizard will guide you through the conﬁguration.

In Skype proxy you can conﬁgure all the settings regarding this

proxy. This is how to do it:

1. From the Idle screen, press to enter the main menu.

2. Press and to select Settings.

3. Press and to select Advanced.

4. Press and to select Internet settings.

5. Press and to select Skype proxy.

6. Press to select Proxy.

7. Press and to select Yes.

8. Press and to select the proxy host type (Automatic,

HTTPS, SOCKS5).

9. Automatic may be selected if your proxy supports this feature.

If you select one of the other options, a wizard will guide you

through the relevant conﬁguration.

Summary of content (12 pages)

PAGE 1
Advanced Internet Settings You can configure settings such as IP mode, IP address, Skype proxy and Firmware proxy. However, if you have an advanced Internet connection and are not familiar with firewalls and ports, we recommend that you consult someone with knowledge on this or read more on the topic at www.skype.com. In IP mode you can choose Dynamic or Static.
PAGE 2
In Firmware proxy you can configure all the settings regarding this proxy. This is how to do it: 1. From the Idle screen, press to enter the main menu. 2. Press and to select Settings. 3. Press and to select Advanced. 4. Press and to select Internet settings. 5. Press and to select Firmware proxy. 6. Press 7. Press to select Proxy. and to select Yes. 8. Use the keypad to enter the HTTP proxy IP Address. A wizard will guide you through the configuration.
PAGE 3
handset. 8. Under All Firmware vers. , you can see prior updates. Press and to select your preferred version. 9. Press again to install the selected version. You will then be asked if you are sure you want to update. Press to accept the update, to cancel. NOTE: If your GE/Skype phone has not been updated after 30 minutes, you must restart the GE/Skype phone by disconnectiong and reconnecting the base station to the power outlet.
PAGE 4
. Insert the new batteries. 5. Put the battery compartment door back on. 6. Place handset in the base or handset charge cradle to charge. Allow the handset battery to properly charge (for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised. NOTE: The RBRC seal on the battery used in your Thomson Inc.
PAGE 5
Handset does not ring • Make sure the handset ringer switch is turned ON, this can be done through the handset setup menu - Ringer Volume. • The handset may be out of range. Move closer to the base. • You may have too many extension phones on your line. Try unplugging some phones. • Check for dial tone. No sound from handset • Adjust handset volume. • Check and adjust sound settings in Skype, under "Sound Devices".
PAGE 6
Handset displays "HANDSET NEEDS REGISTRATION" • Follow the programming in the telephone procedures to reregister the handset to the base. • Press the SELECT button to begin handset registration. Follow instructions on Handset screen. Registration did not work • Charge the batteries for 16 hours. • Uplug and then plug in the power adaptor. Caller ID Solutions No Display • Charge or replace the batteries. • Make sure that the unit is connected to a non-switched electrical outlet.
PAGE 7
• CHARGE/IN USE indicator on the base fails to illuminate. • Limited range General Product Care To keep your unit working and looking good, follow these guidelines: • Avoid dropping the handset, as well as other rough treatment to the phone. • Wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. • Retain the original packaging in case you need to ship the phone at a later date.
PAGE 8
Service If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800448-0329. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This product may be serviced only by the manufacturer or its authorized service agents. Changes or modifications not expressly approved by Thomson Inc. could void the user’s authority to operate this product.
PAGE 9
• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must be presented to obtain warranty service.” For rental firms, proof of first rental is also required. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to: Thomson Inc. 11721 B Alameda Ave. Socorro, Texas 79927 • Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
PAGE 10
the use of this product or arising out of any breach of any express or implied warranty on this product. This disclaimer of warranties and limited warranty are governed by the laws of the state of Indiana. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited to the applicable warranty period set forth above.
PAGE 11
Index A Accessory Information 24 51
PAGE 12
Skype™, SkypeMe™, SkypeOut™, SkypeIn™, Skype Voicemail™, the whole world can talk for free™, the Skype logo and the S logo are trademarks of Skype™. Model 28310 00017707 (Rev. 0 Dom E/S) 06-49 Printed in China Thomson Inc. 10330 North Meridian St. Indianapolis, IN 46290-1024 © 2006 Thomson Inc.