User's Manual

Muting the Microphone and Ringer

Press the MUTE (SKL) button to switch the microphone on or off during a call.

Press the MUTE (SKL) button to switch the ringer on or off during ringing.

Paging the Handset

If a handset has been misplaced, it is possible to call all the registered handsets by

pressing the PAGE button on the base station. The handset page ring can be stopped

until by pressing any button.

Handset Speaker Phone

Press the (speaker) button to activate or deactive the handset speaker.

Key Lock

To lock/unlock the handset keypad press and hold the (#/PAUSE/lock) button for

 seconds.

NOTE: Incoming calls can still be received and the alarm can be

turned off by press any key.

NOTE: Only

(#/PAUSE/lock) and END CALL button

are functional

when keypad is locked.

Call Transfer/Forwarding

(applicable only with additional handsets)

If the telephone is connected to a PBX network, it is possible to put a landline call or

Skype call on hold and call other subscribers, or forward calls to another handset.

1. Press the INT button to hold the external call and initiate an internal call.

. Use the 6 or 5 button to scroll through the registered handsets,

3. Press the (landline) or (Skype) or (speaker) button to select the desired

handset.

4. Press the END CALL button to transfer the external call to the handset before or

after it answers the call.

NOTE: There must be more than two handsets registered to the

base for the call transfer/forwarding feature to work.

NOTE: If the internal call is not answered in 30 seconds after the

call transfer, it will call back the originating handset.