User's Manual

Page

The page feature helps you locate a misplaced handset. To send and receive

pages, all handsets must be registered. If your handset is not registered, follow the

instructions in the Registration section of this manual.

Paging from the Base/Group Page

Use the base-only to page all registered handsets at the same time.

1. Make sure the phone is OFF (not in talk mode).

2. Press the PAGE/PUSH TO TALK button on the base.

3. All registered handsets beep for two minutes and

PAGING FROM BASE shows on

each handset’s display.

4. To cancel the page, press the PAGE/PUSH TO TALK button on the base, or press the

TALK or SPKR button on each handset.

Handset to Handset Paging

IMPORTANT NOTE: The following procedures can ONLY be done with

Model 28101 and 28103 handsets.

1. Make sure the originating phone is OFF (not in talk mode).

2. Press the Menu (SK) button and use the

6 or 5 button to scroll to EXTRAS.

3. Press the Select (SK) button to enter the menu.

4. A list of registered handsets shows on the display. Use the

6 or 5 button to scroll

to the desired handset you want to page. Or scroll to ALL to page all handsets.

5. Press the Select (SK) button.

6. The receiving handset is paged and emits a tone.

7. To cancel the page, press the Back (SK) button or END/Cancel button on the

originating handset.

-OR-

Press the Answer (SK) button or TALK or SPKR button on the receiving handset to

enter intercom mode.