User's Manual

Deleting a CID Record

1. Make sure the phone is OFF (not in TALK mode).

2. Press the

button.

3. Press the

View (SKL) button.

4. Use the

or button to scroll to the CID record.

5. Press the

DELETE/ﬂash button to show DELETE?.

NOTE: To delete all CID records, press and hold the DELETE/ﬂash

button.

6. Press the Yes (SKL) button to conﬁrm the deletion. The screens displays DELETED.

NOTE: Press the No (SKR) button to return to the standby mode or if

no action is taken, it will exit automatically after one minute.

Connecting the Belt Clip

1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of

the handset.

2. Snap the ends of the belt clip into place.

Connecting Optional Headset

Each handset can be used with an optional headset for hands free operation.

1. Connect the headset to the headset jack on the side of the handset. The

handset receiver and microphone are disabled when the headset is connected.

2. Adjust the headset to rest comfortably on top of your head and over your ear.

Move the microphone to approximately two to three inches from your mouth.

3. Press the

TALK button to answer a call or make calls using the headset.

4. To return to normal operation, unplug the headset from the jack.

Changing the Battery

CAUTION: To reduce the risk of ﬁre or personal injury, use only

the Thomson Inc. approved model 5-2840 Nickel-metal Hydride

battery (Ni-MH), which is compatible with this unit.

1. Make sure the telephone is OFF (not in TALK mode) before you replace the battery.