User's Manual

42
You may review the stored information at any time. Calls received since your last
review show on the top line of the display as; All=XX, New=XX.
Reviewing CID Records
As calls are received and stored, the display is updated to let you know how many
calls have been received. To scroll CID records:
1. Make sure the phone is
OFF (not in talk mode).
2. Press the
button. (a tally of Alll calls and New ccalls displays.)
3. Press the
View (SKL) button.
4. Press the
button to review the newest CID record.
5. Press the
button to review the oldest CID record first.
Dialing a CID Number
1. Make sure the phone is OFF (not in TALK mode).
2. Press the
button.
3. Press the
View (SKL) button.
4. Use the
or button to display the desired record.
5. Press the
TALK or SPKR button. The number dials automatically.
Formatting a CID Number Before Dialing
NOTE: Depending on (a) how the incoming caller’s phone number is
formatted when it is received, and (b) whether or not you previously
pre-programmed your local area code into the PHONE SETTING
menu, you may need to adjust the format of the incoming caller’s
stored phone number before calling back the record.
If the number does not dial as shown, follow steps below to format it:
1. Make sure the phone is
OFF (not in talk mode).
2. Press the
button.
3. Press the
View (SKL) button or press the button again.
4. Use the
or button to scroll to the desired CID record.
5. Press the
More (SKL) button.
6. Press the
Select (SKL) button.