User's Manual

35
-OR-
Press
the or button to select the desired record, then press the TALK or
SPKR button on handset.
-OR-
Press and hold the number key to get the corresponding speed dialing number.
2. When finished, press the
END/cancel button on the handset to hang up.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press
the DELETE/flash button until all of the digits are erased.
NOTE: To set the speed dialing number, refer to section “Phone
Book -> Adding the Speed Dialing Number”.
Cellular Calls
1. In standby mode, dial the desired number, press Cell (SKR) button.
NOTE: If more than one bluetooth cell phone device is connected
use the or button to select the desired device.
2. Press Select (SKL) button to confirm.
4. Press the
END/cancel button when finished.
Answering a Call
Check the display to see who is calling.
Landline Calls
1. Pick up the handset, and press the TALK or SPKR button on the handset.
2. When finished, press the
END/cancel button on the handset, or place the handset
in the cradle.
Cellular Calls
1. Pick up the handset, and press the Cell (SKR) btton on the handset.
2. When finished, press the
END/cancel button on the handset, or place the handset
it the cradle.
Receiving a Landline Call during a Cellular Call
During a cellular call, if you receive an incoming landline call.