User's Manual

• Press the 4 button to move the ashing cursor to the right.

• Press the 3 button to delete a digit.

• Press the menu/ok button to save.

to input Linked Photo:

• Use the navigational buttons to select the desired photo or folder (selecting

a folder will enable all photos in folder to cycle for the Caller ID instead of just

one photo)

• Press the menu/ok button to select. The screen displays Are you sure? No

Yes. Select Yes to save or No to return to photo selection,

to edit Telephone Number:

• Press the 3 button to delete digits.

• Use the 5 or 6 button to re-enter number.

7. Use the

navigational buttons to highlight Save & Exit.

8. Press the

menu/ok button to save and return to Use CID Records menu.

NOTE: The Use CID Records screen DOES NOT display associated

PCIDL's. Review existing PCIDL's before adding possible duplicates.

9. Press the exit button repeatedly to return to the photo screen.

Note: If internal memory is too full to store any more of photos

to CID links, then when user selects “Photo Caller ID Setup”, an

alert panel appears: “Phone memory is full. Delete some pictures

or folders to free up some space. Would you like to do that now?

Yes No. Selecting “No” exits to the Frame Setup Menu with “Photo

Caller ID Setup” highlighted; Selecting “Yes” goes to the “Delete

Photos” screen.

Enter Caller's Information

From the Add new Picture-Caller ID Link menu:

1. Use the

5 or 6 button to scroll to Enter Caller's Info.

. Press the

menu/ok button to select.

. Repeat Steps 5-9 in the Use Caller ID Records Section to enter information,