User's Manual

1
Slide Show Setup
You can adjust how the photos in the slide show are presented.
From the Frame Preferences menu:
1. Use the
5 or 6 button to scroll to Slide Show Setup.
. Press the
menu/ok button to conrm and select from the following settings;
Source, Speed, and Shufe.
. Use the
5 or 6 button to scroll to desired setting.
4. Press the
menu/ok button to conrm.
Source - choose whether a slide show displays from internal memory, a memory
card, or both.
• Use the
5 or 6 button to scroll to desired option.
The default setting is Both.
• Press the menu/ok button to save. The screen displays
Saved.
Speed - controls how fast the photos change in the slide show.
• Use the
5 or 6 button to scroll to desired option.
The default seting is 5 seconds.
• Press the menu/ok button to save. The screen displays
Saved.
Shufe - choose whether photo in a slide show are randomly displayed or not.
Select On to display photos randomly. Select Off to display photos in
chronological installation order from oldest to newest.
• Use the
5 or 6 button to scroll to desired option.
The default seting is On.
• Press the menu/ok button to save. The screen displays
Saved.
5. Press the
exit button repeatedly to return to the photo screen.
Power Saver
Select if and when frame goes to power saver mode. When Power Saver is activated,
the backlighting dims.
From the Frame Preferences menu:
1. Use the
5 or 6 button to scroll to Power Saver.
. Press the
menu/ok button to conrm.
. Use the
5 or 6 button to scroll to desired option. The default setting is Off.
4. Press the
menu/ok button to save. The screen displays Saved.
5. Press the
exit button repeatedly to return to the photo screen.