User's Manual

32
Memory Log and Phone Book (Directory) Memory
You may store data in the Phone Book Directory (up to 100 memories) or
an Intercom/Memory (10 buttons located to the right of the number pad
on the base). The Phone Book and each Intercom/Memory Log stores up to
21 characters and 32 digits.
The records are stored by alphabetic ascending order.
Adding Phone Book Entries
1. Make sure the phone is OFF (not in talk mode).
2. Press the DIR button.
3. Press the New soft key. Enter name shows in the display. Please refer to
section “Handset Name” for name editing method.
4. Press Save soft key. Enter number shows in the display.
5. Use the touch-tone pad to input a telephone number.
TIP: Press the #pause button twice to insert a pause in a number if
necessary.
6. Press the Save soft key to enter VIP tone melody selection.
7. Use VOL (- or +) button to scroll to the selection and press Select soft
key to complete.
NOTE: If Memory full shows in the display, you should delete one or more
unnecessary records and repeat above steps to continue the call record
storage.
OR
1. Make sure the phone is OFF (not in talk mode).
2. Press Store soft key.
3. Select Location shows in the display. Press a One-touch button (1-10)
to save the record in that memory location.
NOTE: If there is a record stored in selected memory location. Press Replace
soft key to confirm overwrite or press the Back soft key, then select a new
location.
4. Enter name shows in the display. Please refer to section “Handset
Name” for name editing method.
5. Press Save soft key. Enter number shows in the display.
6. Use the touch-tone pad to input a telephone number.
TIP: Press the #pause button twice to insert a pause in a number if
necessary.
7. Press the Save soft key to enter VIP tone melody selection.
8. Use VOL (- or +) button to scroll to the selection and press Select soft
key to complete.
Memory