User's Manual

29
Answering an Intercom Call
When you receive an Intercom call, the display shows the Caller’s name and
Phone ID.
NOTE: If you want to answer with the speakerphone, press the Speaker
button. If you want to answer by headset, press the Headset button (the
headset must be connected).
NOTE: Press Speaker to automatically select a party. If you receive an
incoming call and intercom call at the same time the unit automatically
selects the ringing line.
Page
The page feature helps you locate a misplaced handset.
1. Press the Page button on the base. The charge/in use indicator on the
base flashes; the handset beeps and Page from base shows in the
handset display.
2. To cancel the page, press the Page button on the base, or press Stop
soft key on the base, or press Exit key on the base, or press any key on
the handset. Otherwise the paging will last for 2 minutes.
Auto Standby
If you place the handset in the cradle while the handset is off the hook
(during a call), the call is automatically disconnected.
Caller ID (CID)
IMPORTANT: In order to use this unit’s Caller ID features, you must subscribe
to either the standard Name/Number Caller ID Service or Call Waiting Caller
ID Service. To know who is calling while you are on the phone, you must
subscribe to Call Waiting Caller ID Service.
The summary screen shows the current time, current date, number of
new CID records to be reviewed or total number of records saved to CID
memory. It is displayed until any button is pressed. Within 60 seconds of
receiving a new call, the new caller information is displayed.
Caller ID
LINE1
LINE2
L1
PLAY
Base Display
Handset Display