User's Manual

Ringer On/Off

1. Make sure the phone is in idle mode.

2. Press the VOL (- or +) button to enter. Use the VOL (- or +) button to

scroll to your selection and use the DIR or CID button to toggle

between L 1 and L 2. The default setting is VOL 3.

3. Press the Select soft key to save your selection and the new volume

setting shows in the display.

NOTE: If you choose the ringer OFF, L1/L2 RINGER OFF shows in the display.

Speakerphone, Handset, and Headset Volume

While the phone is in use, during the desired mode, press the VOL (+ or -)

buttons until you reach a comfortable listening level. The phone stores the

setting after the last button press.

Hold

(TBD)

Conference Calls

(TBD)

Intercom Calls

One-Touch Intercom

1. Press the Intercom/Memory button (1-10) for the station you want to

intercom with. The Speaker turns On.

You may press the Intercom button, then press the Intercom/Memory

button (1-10) for the stations you want to intercom with. The

speakerphone automatically turns on.

Press the Intercom button, and all the registered handsets and the base

except itself list in the log, use the VOL (- or +) key to scroll to the

station you want to intercom with, and then press select soft key to

conﬁrm. The speakerphone automatically turns On.

NOTE: If you want to switch to the headset, press the Headset button.

NOTE: To abort intercom call, press Speaker button.

2. To end the intercom call, hang up.

NOTE: If the receiving station does not answer within 45 seconds, the

intercom call is cancelled. You will hear an error tone and Page Unavailable

shows in the display.

Intercom Calls