User's Manual

27
Redial
1. Press the Talk button, or press the Speaker button (speakerphone mode),
or press the Headset button (headset mode) and the first available line
will go off hook. If both lines are available, Line 1 will be used.
OR
Press a Line button to select a line.
2. Press the Redial button.
NOTE: The Redial function will not operate if the number to be redialed
contains more than 32 digits. If the number is longer than that, you will
hear an error tone.
Reviewing the Redial Numbers
Your phone records up to three previously dialed phone numbers.
1. When the phone is idle, press the Redial/Format button.
2. Use the VOL (- or +) button to view the last three previously dialed
numbers.
3. While the preferred number is displayed, press the Speaker, Talk, Dial, or
a Line button to dial the phone number.
NOTE: If you do not select a line button, the line is automatically seized and
the number is dialed accordingly.
Storing a Redial Record in Phone Book
1. Make sure the phone is OFF (not in talk mode).
2. Press the Redial button, then use the VOL (- or +) button to scroll to the
desired redial number.
3. Press the Select soft key.
4. Enter name shows in the display. Input a name. Please refer to section
“Handset Name” for name editing method.
NOTE: A name must be input otherwise the record cannot be stored.
5. Press the Save soft key to enter VIP Tone Melody selection.
6. Use the VOL (- or +) button to scroll to the desired melody.
7. Press Select soft key, Saved shows in the display. Repeat steps 2 through
7 to save other records.
Transferring a Call to Another extension
(TBD)
Receiving a Transferred Call from Another extension
(TBD)
Telephone Operation